Non-destructive testing of weld seams, castings and components
Non-destructive CT inspection
without damaging the component
As an accredited testing laboratory, we test steel, cast iron and plastic components throughout Germany and visualize internal structures, welded joints and material defects.
Contact us without obligation and receive a solution proposal including an offer in max. 24 hours
Non-destructive testing of weld seams, castings and components
Non-destructive CT inspection
without damaging the component
As an accredited testing laboratory, we test steel, cast iron and plastic components throughout Germany and visualize internal structures, welded joints and material defects.
Contact us without obligation and receive a solution proposal including an offer in max. 24 hours
What is non-destructive testing?
Non-destructive testing is a method of inspecting components for internal and external defects without impairing their function or structure.
3DIMETIK GmbH & Co KG is your nationwide contact for non-destructive testing using industrial X-ray and computed tomography. The computed tomography scanner from ZEISS (formerly GOM) can produce high-contrast and high-resolution computed tomography scans.
- The test is completely non-destructive so that the component can continue to be used without damage.
- Internal defects, material flaws and inhomogeneities are precisely visualized in the volume.
- Weld seams, cast parts and complex joining processes can be analyzed in detail and reproducibly.
- All test results are documented in a traceable manner and support reliable quality assurance.
Non-destructive testing of weld seams
3DIMETIK is your nationwide contact for the non-destructive testing of weld seams using industrial X-ray and CT technology.
- Detection of pores, cavities and material-related defects inside the component
- Inspection of binding defects, cracks and structural irregularities
- Analysis of steel and metal connections for internal quality and integrity
Non-destructive testing of castings
3DIMETIK inspects cast parts made of aluminum, steel or zinc non-destructively for internal material defects and geometric deviations.
- Detailed void and porosity analysis in the entire component volume
- Evaluation of inclusions, inhomogeneities and material-related irregularities
- Documented and precise localization of defects in the 3D volume
Non-destructive testing of components
3DIMETIK analyzes components made of a wide range of materials using industrial computed tomography.
- Complete visibility of complex internal structures in the entire component volume
- Geometric evaluation and dimensional analysis directly in the high-resolution 3D volume
- Precise target/actual comparison of the real geometry with the underlying CAD file
Typical testing tasks
in non-destructive testing
3DIMETIK covers the entire spectrum of industrial computed tomography: from the non-destructive testing of individual components to the analysis of complex assemblies in series. In addition to classic cavity and porosity evaluation, functional, geometry and joining analyses are also typical areas of application.
Welded and joined joints:
-
Weld seam inspection in volume
-
Joining zone analysis for welded or bonded joints
-
Detection of binding defects, cracks and assembly deviations
Cast and metal components:
- Porosity analysis
- Blowhole detection
- Evaluation of inclusions and defects
- Classification according to P202 / P203
Category: Geometric analysis:
-
Installation space check
-
Target/actual comparison with the CAD file
When you contact us, you will always speak directly to your contact person for industrial computed tomography. No call center waiting loops, just competent measurement technicians.
Which materials can be tested non-destructively?
Non-destructive inspection of
metal & steel
Non-destructive testing of weld seams, steel components and structural components.
Non-destructive testing of
aluminum & cast zinc
Analysis of blowholes, porosities
and internal material deviations.
Non-destructive testing
of plastic
Testing of air pockets, wall thicknesses and internal structures.
Non-destructive testing
of composite materials
Analysis of complex multi-component
and hybrid components.
When you contact us, you will always speak directly to your contact person for industrial CT. No call center waiting loops, just competent measurement technicians.
References
Individual inspection or series inspection
with 3DIMETIK
Individual audit / project-related analysis
The individual inspection is suitable for development projects, initial sampling or complaints about individual weld seams, components and cast parts. Defined test characteristics are precisely analyzed and documented in a traceable manner.
- Analysis of defined test characteristics and function-critical areas
- Complete 3D visualization with target/actual comparison to CAD geometry
- Detailed test report with standard-compliant evaluation
Series testing for larger volumes
Series testing under a framework agreement enables the reproducible and economical monitoring of larger quantities in series production. Standardized test parameters ensure reliable and comparable results in the long term.
- Standardized test parameters for reproducible results
- Automated evaluation and structured archiving
- Individual inspection concepts and price advantages for higher scan volumes
Years of 3D measurement technology
Experience
Successfully completed
projects
24 hours max. until you receive an offer
10 reasons for non-destructive testing with 3DIMETIK
- Non-destructive 3D analysis without dismantling the assembly
- Complete interior view of complex, assembled structures
- Reliably detect invisible assembly and joining defects
- Analysis of welded, soldered and bonded joints in volume
- High measuring accuracy with complete volume documentation
- Localization of leaks and function-critical areas
- Suitable for individual testing and reproducible series testing
- Root cause analysis for complaints and field failures
- Standard-compliant evaluation in an accredited test laboratory
- Individual testing concepts with nationwide support
Do you have any questions? Please contact us without obligation. We will get back to you within 24 hours.
3 steps to the CT exam!
1. define test target & coordinate component data
Together, we clarify the test objective, standard requirements and relevant issues. You send us component data, CAD files or sample parts - we define the optimum test strategy based on this.
2. CT scan in the accredited test laboratory
The component is scanned in our DAkkS-accredited laboratory using industrial CT or X-ray technology. Test parameters are precisely defined to ensure reproducible and standard-compliant results.
3. analysis, evaluation & documentation
You receive a well-founded evaluation including 3D visualization, standard-compliant assessment and a structured test report. Optionally, we can support you with root cause analyses or further measures.
Unsure which of our services is right for you? Contact us without obligation and speak to a measurement technician today.
Non-destructive testing according to VDG P202 / P203
Non-destructive testing at 3DIMETIK is carried out in accordance with VDG P202, VDG P203 and other industry-specific standards and customer specifications.
As an accredited test laboratory in accordance with DIN EN ISO/IEC 17025, we guarantee reproducible test processes and standard-compliant reporting.
Contact us now without obligation