Assembly inspection & detecting joining errors / Joining inspection
Non-destructive testing of assembled components using industrial CT
3DIMETIK makes internal assembly deviations, joining errors and function-critical problem areas visible. And all without dismantling and without damaging the component.
Contact us without obligation and receive a solution proposal including an offer in max. 24 hours
Assembly check and joining check / detecting joining errors
Non-destructive testing of assembled components using industrial CT
3DIMETIK makes internal assembly deviations, joining errors and function-critical problem areas visible. And all without dismantling and without damaging the component.
Contact us without obligation and receive a solution proposal including an offer in max. 24 hours
Areas of application for assembly control / joining technology control
Assembly test for assemblies installed at
Checking the correct position and orientation of individual components in relation to each other when fully assembled.
Detecting joining errors in
welded and soldered joints
Detection of defects, air inclusions or insufficient connections in welding and soldering zones.
Detect leaks in
components
Analysis of seals and joints to localize leaks or crushed sealing lips.
Make assembly-related collisions visible
Visualization of component collisions or unwanted contact inside the assembly.
Identify blowholes at joints
Detection of internal material cavities in the area of joints that could impair the stability or durability of the joint.
Analyze porosities in the sealing and
functional area
Analysis of finely distributed pores in functionally critical areas that can lead to leaks or premature component failure.
When you contact us, you will always speak directly to your contact person for industrial CT. No call center waiting loops, just competent measurement technicians.
3DIMETIK – Your metrology service provider for assembly inspection & joint inspection
The 3DIMETIK GmbH & Co. KG is your Germany-wide partner for non-destructive testing methods using industrial computed tomography, in particular for cavity testing, porosity analysis, assembly control and defect analysis.
We support companies from industry, development and quality assurance in the precise analysis of internal component structures.
The tests are carried out in accordance with applicable standards (e.g. P202 and P203) and recognized quality standards and are safeguarded by corresponding accreditations and quality-assured processes.
Maximum transparency and a look inside the component thanks to industrial CT
With industrial computed tomography, assembled components can be analyzed completely non-destructively without dismantling or damaging them.
- The assembled module is scanned by our computer tomograph as it is.
- A high-resolution 3D volume is created from several thousand X-ray projections.
- Assembly deviations, joining errors and internal collisions become visible in the volume.
- Critical areas such as joints, sealing zones or contact surfaces are specifically evaluated.
- The results are provided as a test report and visual evaluation.
- Results directly usable for quality assurance
- Standard-compliant assessment according to P202 and P203
When you contact us, you will always speak directly to your contact person for industrial computed tomography. No call center waiting loops, just competent measurement technicians.
10 reasons for a CT-based
assembly inspection / joint inspection
- Non-destructive testing without disassembly
- Complete interior view of mounted assemblies
- Reliably detect invisible assembly errors
- Analyze joining errors at welded and soldered joints
- High-resolution and fast results
- Localize leaks and sealing problems
- Suitable for individual parts and series testing
- Root cause analysis for complaints and field failures
- No influence on the real actual state
- Detailed measurement reports
Do you have any questions? Contact us without obligation. We will get back to you within 24 hours.
References
3DIMETIK – Your service provider for measurement technology
As an accredited testing laboratory according to DIN EN ISO/IEC 17025 3DIMETIK is your contact for metrology services of all kinds. We support you in the non-destructive analysis of blowholes, porescracks and defects.
More about industrial computed tomography with 3DIMETIK via the linked page.
Years of 3D measurement technology
experience
Successfully completed
projects
24 hours max. until you receive an offer
Precise measurement results in the shortest possible time!
1. contact without obligation by e-mail or telephone (recommended)
Contact us without obligation and tell us about your concerns. The quickest way to get an answer is to call us on 0561 820 873 001.
2. personal consultation & proposed solution
Receive immediate expert advice from a measurement technician with a solution proposal tailored to your individual needs.
3. concrete offer after a maximum of 24 hours
We will provide you with a concrete offer within 24 hours.
4. secure data transfer & implementation of the project in approx. 10 working days
Once you have accepted the offer and we have received the data and goods/components, we will start work on your project immediately.
5. delivery of the results
You receive the finished reports and components back on time and your project is successfully completed. Our visualizations make the results easy to understand.
Unsure which of our services is right for you? Contact us without obligation and speak to a measurement technician today.
Contact us now without obligation